SONGMICS Collage Picture Frames, 4×6 Picture Frames Collage for Wall Decor, 10 Pack Photo Collage Frame for Gallery, Multi Family Picture Frame Set, Glass Front, Assembly Required, Ink Black

Awesome frame
This frame comes not assembled so you have to put it together. It looks very nice when done and is very sturdy. Would purchase again!

Nice Idea for photos – Installation patience is required!
So the finished product is very nice and unique. Glass was important to me and it was not plastic. The frame material was acceptable for the price and the holes were drilled pretty accurately. Accurately enough at least. One of the clips that holds the picture frame backs in place was very loose and is probably not doing its job. The rivet was just poorly affixed and there is no way to fix it. There are 4 clips per picture so it will still work. If you replace pictures often this could be an issue as the clips could fail with repeated use. The overall assembly seems sturdy enough and should hang together. The clip that you hang it on the wall with is a little suspect. I am not hanging this over something that it could damage if it falls. It is not going over my bedInstallation: It is sort of comical. Zero instructions – I mean zero in the box, but I knew that coming into this. At first I referenced a video, but it was for a different frame arrangement so be careful there. For the first 5 minutes I thought this thing was a complete mess. Next, I simply used the finished assembly picture found on the Amazon product page (from the back view with the frame numbers) to assemble it – took 30 minutes or less. A few suggestions:1. Assemble these in “sets” before connecting the top half to the bottom half. Start with the #1 frame and build around it layering like the picture shows. Do the same thing around the #2 frame and then there are 2 horizontal frames on the left and right that essentially connect the top half to the bottom half as the last layer. Hope this makes sense.2. Put the wood dowels in first as you layer each frame to make sure you are aligned. Then when you are turning the screws, you have to apply pressure to get them to bite into the wood, but at the same time you need to support the frame you are screwing so that it is installed flat and level – otherwise it might angle down making it look poor and installation of the next layer difficult. I used a stack of index cards the correct thickness to support the overhanging portion of the frame while I screwed it to the frame it was being layered on.3. Don’t screw too deep as the wood is soft enough that you can screw way below the surface if you keep turning and the screw head will disappear which will weaken the connection. I did it twice before I noticed. I would not use power as the screws are not the highest quality and the wood is soft.The finished look is a 5 as it looks great for me. I imagine if you mess up installation or if the holes are not drilled properly or you do not have patience, then you might feel differently. I will probably buy another one of these.

Well made and looks great!
I’m creating a photowall in my hallway, and needed a frame to be the center focal piece. This frame is well made, actual wood, and solidly built (you must do the assembly). The panes are glass, and not plastic. It can be hung either vertically or horizontally. As the center focus of my wall, it is outstanding!As I mentioned, you must assemble the frame. Frames are positioned by wooden pegs which align the pre-drilled screw holes. There are a good number of screws! Still, it only took me about 10 minutes to completely assemble. One bit of advice – the first two screws are tiny, and require a Phillips screwdriver with a small head. The rest of the screw are also Phillips, but don’t need the smaller head.All in all, it’s a great frame, and I recommend!

Was hopeful, but poorly constructed
I was really hopeful about this product given the pretty decent photos and reviews, but in the end I was very disappointed. For my first set, TWO of the first four screws I put in had their heads break off while tightening. Why what I screwing so hard? Because the poorly drilled pilot holes in the rear frame bulged out so much that the two pieces wouldn’t sit flush. I gave up and hoped I’d just gotten a fluke, opting for a replacement. Sadly, box two has the same issues with the pilot holes, and I got photos this time–I see now that at least one other buyer posted images of the same issue. Returning this for a full refund and would strongly suggest others look at a different item.

Esperaba que viniera armado, pero no; sin embargo, está súper sencillo de armar y es de muy buena calidad (obvio no madera, pero sí muy buen MDF). Se ve súper bello y queda muy fijo. Volvería a comprar sin dudas, pero ya con dos es suficiente jaja

I really like this frame. It’s very nice and I love how it’s wood and the white paint has wood grain in it. My only problem was a piece of the assembly hardware was missing!! I circled the piece in yellow. It’s a metal plate that attaches and stabilizes frame 1 to frame 2 which is the starting point. I built the frame without it and then used tape on the backside to secure it where the metal plate should have been. Works fine! I didn’t want to return the product because I like it so much so tape it was! The assembly was super easy, all the frames are numbered and the directions are very clear. Even with the missing part, I’m ordering another one for my other room.